Listed below are past stories that appeared on the front page of our web site.
|
|
| 09/16/11 |
ATTENTION! |
|
| |
 |
Don't let tinkeritis cost you valuable field service dollars. If your customer claims the CanVu generic engine monitor reads no oil pressure, make sure the icon selected is correct. The icon on top left is incorrect. It is turbo boost and can be easily mistaken for the oil pressure icon shown on the bottom left bottom. |
|
|
|
|
| 09/09/11 |
QSX15 Air Cleaner Kit |
|
| |
| This air cleaner kit, provided by Cummins Power Products, is designed for use with the QSB6.7 Power Unit. The air cleaner is designed specifically to be shipped as a loose option to be remotely mounted by the customer. It comes included with the air cleaner can assembly, a rain cap, band clamp mounting provisions, hump hosing for connections to the engine, and all necessary tubing. This project was a customer specific request, if you have any special requests, please let us know. |
 |
|
|
|
|
| 08/25/11 |
QSC8.3 Leftside Alternator |
|
| |
 |
Does your OEM have a tight space constraint and can only access one side of the engine for maintenance? Cummins Power Products has the solution. CPP has just recently built and shipped QSC8.3 Power Units with all major service items on the left side of the engine. The alternator and starter have both been moved for easier access during routine maintenance. The alternator has been repositioned on the left baserail and is driven off a crankshaft pulley. |
|
|
|
|
| 08/12/11 |
QSB6.7 Air Cleaner Kit |
|
| |
| This air cleaner kit, provided by Cummins Power Products, is designed for use with the QSB6.7 Power Unit. The air cleaner is designed specifically to be shipped as a loose option to be remotely mounted by the customer. It comes included with the air cleaner can assembly, a rain cap, band clamp mounting provisions, hump hosing for connections to the engine, and all necessary tubing. This project was a customer specific request, if you have any special requests, please let us know. |
 |
|
|
|
|
| 07/26/11 |
GTA855E 0.5g-NOx Emissions Capable Exhaust System |
|
| |
 |
Cummins Power Products has released a new option for leading natural gas emissions product! The GTA855E power unit is now available with an exhaust system that meets the current emissions level of 0.5g-NOx. View more information on the 3-way catalyst option; XH11200 on the GTA855E product page. |
|
|
|
|
| 07/13/11 |
G8.3E 0.5g-NOx Emissions Capable Exhaust System |
|
| |
| Cummins Power Products has released a new option for leading natural gas emissions product! The G8.3E power unit is now available with an exhaust system that meets the current emissions level of 0.5g-NOx. View the 3-way catalyst option; XH11192 on the G8.3E-P product page for additional information. |
 |
|
|
|
|
| 06/30/11 |
New NACD PTO's Released! |
|
| |
 |
Does your customer need a PTO? CPP has just released 6 new NACD PTOs to cover your needs. These options can be installed on the QSB4.5 Power Unit up to the QSL9 Power Unit. Please contact a NACD representative for application related information.
11.5 inch, 2 plate, SAE#3 housing
11.5 inch, 2 plate, SAE#2 housing
(2) 14 inch, 2 plate, SAE#1 housing
(2) 14 inch, 3 plate, SAE#1 housing |
|
|
|
|
| 06/08/11 |
New QSX15-P Allison Transmission Mounting! |
|
| |
| CPP has just released a mounting option (CE11069) for the Allison 4700OFS transmission along with a new cooling package (RA11469)to cool the transmission. The cooling package has a max height of 60" and additional cooling capacity to support a customer supplied tube & shell cooler for the transmission. The transmission support bolts to the standard extended baserails and has a 20" center line height. |
 |
|
|
|
|
| 05/26/11 |
New Lifting Hook Documentation! |
|
| |
 |
New reference material relating to the proper and improper lifting of Power Units has been released. The new documentation will be included in every decal option and also placed in the operation and maintenence manuals.
You can preview the new brochure here. |
|
|
|
|
| 05/13/11 |
New PTO Options! |
|
| |
| CPP has just released three new NACD PTOs to cover your needs. Two and three plate eleven inch PTOs are available along with a three plate fourteen inch PTO. These options can be installed on the QSB4.5 Power Unit up to the QSL9 Power Unit. Please contact a NACD representative for application related information. |
 |
|
|
|
|
| 05/05/11 |
Stainless Steel Enclosures |
|
| |
 |
Have a need for a rust proof enclosure on your power unit? Now you can get it with Cummins Power Products new stainless steel enclosure for the QSB4.5-P Power Unit. The new enclosure, CPP Option EN11241, is made of stainless steel panels instead of the standard steel panels. This material provides excellent rust resistance and gives the power unit a unique look. This project was a customer specific request. If you have an idea for a project, please let us know. |
|
|
|
|
| 04/26/11 |
Power Unit Control and Monitoring |
|
| |
Natural gas is a key source of energy throughout the United States and the rest of the world. The natural gas market is expanding as the world energy demand increases. Controlling and meeting the vast natural gas emission requirements throughout the United States and the world is more important than ever before. The design put together in this project for the KTA19GC-P Power Unit will not only meet local emission guidelines, but also it will allow the customer to control and monitor the KTA19GC-P Power Unit both locally and remotely.
|
 |
| With the integrated and customized design of the FW Murphy Centurion PLUS control panel, this KTA19GC-P Power Unit offers remote and local capability for monitoring, control, warnings, and shutdowns while meeting emission regulation requirements. |
|
|
|
|
| 03/21/11 |
QSB3.3-P Precleaner |
|
| |
| Need extra clean air for your Power Unit? With Cummins Power Products new air cleaner option, now you can get it. This option, AA11322, has a Centri Precleaner included to provide even cleaner air into the Power Unit. The Precleaner also extends the life of the standard air filter within the option. The option is a rear mount air cleaner for use on enclosed power units. |
 |
|
|
|
|
| 03/07/11 |
ECM Programming Now Available! |
|
| |
 |
Have you noticed the new option on our Q-Series Power Units yet? If not, be sure to take a look at option BC11023! This option allows CPP to further tailor a Power Unit to your needs by programming a Template file to the engine's ECM. The features and parameters that can be turned on or off with this includes (but is not limited to): Manual throttle, WIF sensor, Engine coolant level sensor, Starter lockout, and Engine protection. |
| |
|
|
|
|
| 03/03/11 |
New Power Unit Brochure Released! |
|
| |
CPP has released a new brochure outlining the basics of Power Units, general specifications by model, and simplified option family availability. We hope it becomes a great tool for distributors and a quick introduction for end users. |
 |
|
|
|
|
| 02/26/11 |
Product Change Announcement! |
|
| |
 |
Cummins Power Products has upgraded the QSB6.7 radiator to include fan guarding which will support our efforts in injury prevention and user safety.
Effective February 28, 2011, all new orders will be required to contain the new radiator options, which are provided below. |
|
|
|
|
|
| 02/24/11 |
Product Change Announcement! |
|
| |
|
In an effort to continually provide new products and services to our customers, Cummins Power Products will be utilizing a new display panel in all our IN options. The new panel will provide a color display, with improved visibility. Option pricing will remain the same.
We ask that you update your specs by March 14, 2011 so that all new power unit orders will contain the new product. |
Please refer to the new options below.
|
|
|
|
|
| 02/14/11 |
QSX15-P Fuel Shut Off Option |
|
| |
| Cummins Power Products has just released a new fuel shut off option, MS11179. This option was design, with the support of Cummins Northwest, as an answer to a customer specific request for an option intended for use on the QSX15 Power Unit platform with overhead fuel tank installations. This option can be added to an existing power unit order, or can be order as a stand-alone up-fit option. It comes included with all necessary fuel line fittings, electrical connections, and mounting hardware. |
 |
|
|
|
|
| 01/28/11 |
QSB4.5-P Tier 3 Terminal Protectors |
|
| |
| Cummins Power Products has just released terminal protectors for all QSB4.5-P Tier 3 Power Units. Each QSB4.5-P Tier 3 Power Unit will have terminal protectors to help prevent inadvertent shorts to ground. These terminal protectors will come standard with the electrical options as part of the QSB4.5-P Tier 3 Power Units. |
 |
|
|
|
|
| 01/03/11 |
Ultra Low Profile QSX15-P |
|
| |
 |
CPP Has just validated and shipped an ultra low QSX15 Power Unit equipped with a large hydraulic cooler for hydraulic Power Unit applications. The package is both fork and crane liftable with a custom vibration isolated mounting option made from powder coated structural rectangular steel tubing. |
| This entire Power Unit is under 65" in total height! The dual fan arrangement cooling package covers a charge air cooler, radiator, fuel cooler and thermostatically controlled hydraulic oil cooler. This brand new Power Unit is 125°F ambient temperature capable for the most rugged of industrial conditions. The Power Unit has been installed in the machine and is currently awaiting application testing. |
|
|
|
|
| 12/20/10 |
 |
|
| |
Cummins Power Products is pleased to announce the release of the Tier 4i QSB6.7-P and Tier 4i QSL9-P Power Units into production. These power units meet or exceed EPA/CARB Tier 4(i) emissions requirements from Jan 2011 until Tier 4 final emissions requirements begin in Jan 2014 for power ratings 175 hP and above.
- With “It Will Fit” design flexibility and modular option structure, Cummins Power Products Tier 4i products are designed to minimize re-engineering and allow customization for an exact fit to the application.
- Making the Tier 4 Easier, Cummins Power Products completes 9 of the 12 required IQAs factory approved prior to shipment from our facilities.
Tier 4i QSB6.7-P Power Unit
This power unit is available in power ratings from 190 – 300hp (160-224 kW) with rpm ratings from 1800 – 2500 and peak torque ranging from 685 lb-ft to 750 lb-ft (929-1030 N-m). Complete product specifications are available on the QSB6.7-P product page.
Tier 4i QSL9-P Power Unit
This power unit is available in rated power nodes ranging from 230-380hp (172-238kW) and peak torque ranging from 675-1201lb-ft (915 -1628 N-m). Complete product specifications are available on the QSL9-P product page. |
|
|
|
| 12/06/10 |
QSX15-P Single Throttle |
|
| |
Does your piece of equipment have two engines that need to run at the same speed? Cummins Power Products has you covered! CPP has just released a new engine control option that will allow the end user to control two engines with a single throttle. The new option contains an adapter harness that joins the two separate power units to one throttle. Check out the new option here: EC11219 |
 |
|
|
|
|
| 11/30/10 |
QSB3.3-P Precleaner |
|
| |
 |
Cummins Power Products has just released a new air cleaner option for the QSB3.3 Open Power Unit with an installed precleaner! The precleaner removes larger debris before entering the air cleaner assembly. This results in longer filter life and less down time! For more information, see option AA11313 for details. |
|
|
|
|
| 11/16/10 |
QSB6.7-P Centri Precleaner |
|
| |
| New from Cummins Power Products, a two stage, dual replacement element air cleaner assembly with an added pre-cleaner is just what you need. This option for the QSB6.7-P Power Unit has a 25g/cfm dirt holding capacity and is mounted to the rear of the enclosed Power Unit. The option includes all air cleaner brackets, clamps, tubing, and mounting hardware. |
 |
|
|
| |
|
|
| 11/10/10 |
QSB4.5-P Low Profile Exhaust |
|
| |
 |
Need a side-in, end-out exhaust system for your QSB4.5-P enclosed Power Unit? CPP has just released a low-profile exhaust option, XH11174, that allows the Power Unit to have a maximum height of 58.5" when used with an appropriate enclosure option. The option includes a muffler, mounting hardware, rain cap, and all required fastening hardware. If height is a restriction for your power application, then make sure to add this exhaust option to your next order. |
|
|
|
|
| 10/27/10 |
QSK23-P Enclosure and Silencer |
|
| |
| Cummins Power Products has just released its first enclosed HHP Power Unit! The QSK23-P enclosed Power Unit included an air intake and exhaust system mounted to the enclosure top. The intake system features three air cleaners while the exhaust utilizes a puck style silencer. The enclosure contains four lockable lift-off doors to allow for easy maintenance. |
 |
|
|
|
|
| 10/18/10 |
QSB4.5-P Precleaner |
|
| |
 |
Does you equipment operate in an environment filled with air borne debris? Cummins Power Products has just released a new air intake option for the QSB4.5-P enclosed Power Unit with an installed precleaner! The precleaner helps to remove larger debris before entering the air cleaner assembly. This means longer filter life and less down time for your customer! Check out the details here. |
|
|
|
|
| 10/12/10 |
QSX15-P – Reversing Fan Spacer |
|
| |
| Does your customer have an application that requires the use of a reversing fan and a 2-groove pulley on the engine? This can be a difficult combination to achieve along with keeping the Power Unit as tightly packaged as possible. CPP has created an option so your customer doesn’t have to worry about any of these difficulties! With the addition of fan spacer option MS11177, your reversing fan cooling package (RA11397) can now also be used with a 2-groove pulley! |
 |
|
|
|
|
| 10/08/10 |
QSB6.7-P Serpentine Debris Screen |
|
| |
 |
This serpentine style debris screen, option number SG11038, from Cummins Power Products is easy to mount and remove, and can be compatible with the QSB6.7 power unit. It hangs on four bolts but is still sturdy and reliable. If you looking for an easy to use, unique style debris screen for your next QSB6.7 unit, then make sure to add this option to your next order. |
|
|
|
|
| 10/04/10 |
New QSL9-P T3 Cooling Package |
|
| |
| Does your QSL9-P application require additional cooling capacity for a tube and shell cooler? What about an air to oil transmission cooler? CPP has just released a new cooling package for the Tier 3 QSL9-P Open Power Unit that solves both of these problems. The cooling system can achieve a 165 degree Limiting Ambient Temperature and has an additional oil cooler mounted in front of the radiator. Check out the RA11444 details. |
 |
|
|
|
|
| 09/28/10 |
B3.3NA-P T4i Pedestal Mount |
|
| |
 |
Cummins Power Products has just released a pedestal mounting arrangement for the B3.3-NA-P Tier 4i Open Power Unit! This new configuration removes the bulk of a standard mounting system, but still maintains the standard 12.50" crankshaft center line height. The resulting power unit is lighter, smaller and more cost effective. For more information Check out:
Engine Mount - MM11298
Cooling System - RA11354 |
|
|
|
|
| 09/23/10 |
Tier 4i AE Training Unit |
|
| |
Cummins Power Products has completed assembly of a self contained training unit for the Cummins Inc. Application Engineering training group. This unit will be used by every Cummins Application Engineer worldwide to go through AE training at Cummins HQ in Columbus, Indiana.
The training unit will make it's debut at the AE Advanced training in October and AE Basics training in November this year. This unit will help take AE training to the next level! |
Click for Larger Image |
|
|
|
|
| 09/20/10 |
G5.9E - Lower Emissions Exhaust! |
|
| |
 |
Have a natural gas G5.9E power unit and need to meet 0.5g NOx emission levels? With Cummins Power Products new exhaust option XH11172 you can have that emission level met. If you're in need of a low emission natural gas power unit, make sure to add this exhaust option on your next order. |
|
|
|
|
| 09/13/10 |
QSX15 With Air Actuated Clutched Fan Now Released! |
|
| |
Is your cooling fan consuming power in cold climates? Try our new air clutched fan option for the QSX15 Tier 3 Cummins Power Products power unit. This option is now available for ratings below 535HP with rear our turbochargers.
For more information, check out the RA11438 details. |
 |
|
|
|
|
| 09/08/10 |
DCathlon® DC Generator Chosen for Green, Global Application |
|
| |
 |
For some time, Cummins Power Generation has been working to provide all generator needs to Nokia Siemens Networks, one of the largest telecommunications equipment suppliers in the world, operating in over 150 countries with 60,000 employees. Cummins Middle East played a key role in strengthening this relationship by hosting a proof-of-concept demonstration for the DCathlon® DC Generator. Read more at the Cummins Power Blog... |
|
|
|
|
| 08/20/10 |
New QSX15-P Precleaner Released |
|
| |
Does your equipment operate in a dirty environment? CPP just released a new air cleaner option with an air filter precleaner. The precleaner helps remove large debris before it reaches the air cleaner. This helps prolong the life of an air filter and increases the service interval. Check out the new AA11305 option. |
 |
|
|
|
|
| 07/07/10 |
Improved QSK19 Day Tank Option |
|
| |
| The QSK19 now has a new and improved day tank option (MS11164) released with an Oberdorfer lift pump. MS11164 will be a direct replacement for MS11088. |
 |
|
|
|
|
|
|
| 06/22/10 |
New Surge Tank Option for G855-P |
|
| |
 |
CPP Engineering has teamed up with Cummins Rocky Mountain to provide a customer integrated solution. Working with Cummins Rocky Mountain, we have designed a Power Unit that allows their customer to integrate existing heat exchangers into a Cummins Power Products Power Unit. If you have a customer with a specific need, not covered by an existing option, please contact us to see what can be done!
|
|
|
|
|
| 06/18/10 |
QSB3.3-P Fuel Filter Mounting and Stone Guard Options |
|
| |
Ever wonder where to put that fuel pre-filter that comes with our QSB3.3-P Power Unit? Well CPP is pleased to announce that we have developed a fuel filter mounting option that integrated the pre-filter into our package. The filter sits on the lower right of the radiator shroud with the priming pump fully accessible from the right side enclosure door.
We have also developed a new serpentine stone guard option for the QSB3.3-P. This new design will improve the life and cleanliness of your radiator by filtering out troublesome debris. |
 |
|
|
|
|
| 06/15/10 |
Unique QSL9-P Options Released |
|
| |
 |
Does your Power Unit run in a dirty environment? Cummins Power Products has developed a new serpentine stone guard (SG) option for the QSL9-P. This new design will improve the life and cleanliness of your radiator by filtering out troublesome debris.
Also new to the QSL9 product line is a newly designed low profile exhaust.
Lastly, by popular demand the Cummins Power Products design team has designed enclosure lifting hooks to help OEM customers that utilize overhead lifting during assembly. |
|
|
|
|
| 06/09/10 |
New QST30 Transmission Mounting |
|
| |
CPP released a new transmission mounting system for the QST30-P Frac Rig Power Units. Now, with just a difference of one option consisting of two mounts and hardware, the customer can switch from an Allison transmission mounting scheme to a Twin Disc transmission mounting scheme. Not only have our transmission mounting systems become more efficient, CPP has also released an up-fit kit that can be purchased to switch the transmission on your Frac Rig that is already in use in the field! |
|
|
|
|
|
| 06/02/10 |
New B3.3NA & B3.3T Enclosure! |
|
| |
 |
CPP has just released a new enclosure for the B3.3NA & B3.3T Tier 4i Power
Units! The enclosure will accommodate either a top or rear mount air
cleaner and has no perforations in the side of the enclosure. This new
enclosure will prevent hot air from being discharged onto near by
operators! For more details, check out the option page. |
|
|
|
|
| 04/16/10 |
New Cummins Power Products Presentation Released |
|
| |
 |
We have released an updated presentation as an aide in explaining Power Units to end users. The presentation includes general information about the CPP business, outlines the range of product we offer, and gives an overview of the types of information available to distributors and end users. |
|
|
|
|
| 02/08/10 |
QSM11-P Allison Transmission Support
and 165 LAT Cooling Package
|
|
| |
Do you have an OEM who installs Allison Transmissions? CPP has just
released a mounting option for the Allison 4700OFS transmission along with
an oversized cooling package for an OEM installed tube & shell cooler. The
transmission support bolts to the standard extended baserails and has a 20"
engine centerline height. The oversized cooling package has a 165 degree
LAT to handle the added heat rejection from the transmission. |
|
|
|
|
|
| 02/02/10 |
CPP SHOWCASES “PACKAGE PROOF” DESIGN FOR TIER 4 |
|
| |
 |
Cummins Power Products, showcased a new QSB6.7 Power Unit ready for Tier 4 Interim low emissions in 2011 at the World of Concrete show, which opened today in Las Vegas. The QSB6.7 unit is believed to be the first Tier 4-capable Power Unit displayed with an integrated air-intake-to-exhaust aftertreatment.
Read the whole press release.
|
|
|
|
|
| 01/25/10 |
QSB4.5-P Now Compatible with Cummins Air Compressor!
|
|
| |
 |
For those of you that are in need of an air compressor on an enclosed QSB4.5 the wait is over. Cummins Power Products has revamped enclosure doors on the QSB4.5 power units to eliminate interference with an engine air compressor option! Now, both EN11151 and EN11225 are compatible with the Cummins air compressor option, CP9539. |
|
|
|
|
| 01/22/10 |
A2300 / A2300T Pedestal Mounting |
|
| |
Does your OEM need an even smaller A2300 Power Unit? Cummins Power Products has just released pedestal mounting for the A2300 and A2300T Tier 4i Power Units. The new mounting reduces the width of the foot print by over seven inches and utilizes the low profile cooling package for a very compact power unit. |
 |
|
|
|
|
| 01/17/10 |
New Lifting Provisions on Enclosures! |
|
| |
 |
Cummins Power Products will now be shipping all enclosed QSB power units with overhead lifting provisions. These brackets have been release into the QSB3.3, QSB4.5 and QSB6.7 enclosure options to ease installation of our enclosed power units. Click on the image to enlarge. |
|
|
|
|
| 11/16/09 |
B3.3T-P Power Unit Released! |
|
| |
Cummins Power Products is pleased to announce the release of the B3.3T Power Unit into production (engine configuration D782009CX03). This Power
Unit provides our customers with a Tier 4i certified engine line-up up to
74hp and will not be required to meet Tier 4 final requirements until 2013.
The Power Unit is available in an open and enclosed configuration. For
additional information, please check out the product
page. |
|
|
|
|
|
| 08/18/09 |
GTA8.3-P Re-Released for Export! |
|
| |
 |
CPP is pleased to announce the re-release of the GTA8.3 Power Unit (engine configuration D553011CX03). This power unit will be available to be sold outside the US to foreign markets and includes an enhancement to the cooling system: the Charge Air cooler has been replaced with a 2P2L cooling system. For additional information, including drawings, please check out the product page. |
|
|
|
|
| 08/04/09 |
GTA8.3SLB Power Unit Released! |
|
| |
CPP is pleased to announce the release of the GTA8.3SLB Power Unit (engine configuration D553012CX03). This power unit conforms to 2008 NSPS Standards with the inclusion of Simple Lean Burn (SLB) technology. For additional information, including drawings, please check out the product page. |
|
|
|
|
|
| 06/26/09 |
New DC Generator Programming for Solar Applications! |
|
| |
 |
Cummins Power Products is proud to announce an enhancement to its DCathlon generator product! The control programming has been adapted to better serve the Solar Energy market by allowing the unit to more intelligently monitor when it needs to charge and when it's okay to return to standby mode. This will equate to a fuel savings by our customers, saving everyone money over time! We are proud of this development and leap in programming technology, and expect to continue to use this to better serve our customers in the alternative energy market! |
|
|
|
|
| 05/08/09 |
Automation Alley Member! |
|
| |
Cummins Power Products is now recognized as a member of Automation Alley, a regional consortium of high tech businesses that drive the growth of Southeast Michigan’s technology business economy. Through a collaborative culture that focuses on workforce and business development initiatives, Automation Alley presents opportunities for business leaders to foster technological innovation and economic growth. The organization’s more than 1,000 members represent the diversity of the region's technology industry leaders, progressive businesses, government entities and educational visionaries, all working together to strengthen the region’s economy.
Cummins Power Products’s involvement with Automation Alley supports its continued vision to enhance the region’s economy and contribute to Southeast Michigan’s business community. Collaboration with this innovative organization is of great importance to CPP’s continued growth in Michigan. |
|
 |
|
|
|
|
| 04/02/09 |
G5.9E Power Unit Released! |
|
| |
|
Cummins Power Products is pleased to announce the release of the G5.9e Power Unit (engine configuration D491015CX02). This power unit conforms to 2008 NSPS Standards with a factory installed AFR and includes a 3-Way catalyst. For additional information, including drawings, please check out the product page. |
|
|
|
|
| 03/31/09 |
G8.3E Power Unit Released! |
|
| |
| CPP is pleased to announce the release of the G8.3e Power Unit (engine configuration D551015CX03). This power unit conforms to 2008 NSPS Standards with a factory installed AFR and includes a 3-Way catalyst. For additional information, including drawings, please check out the product page. |
|
|
|
|
|
| 03/11/09 |
FH Option Help! |
|
| |
 |
A common dilemma for engine spec.ing is FH selection. The CPP option information section of each engine home page allows you ( in most cases ) to select from a variety of FH sizes. The question then becomes, which of the FH options are acceptable? To assist in answering the question, click on any MM option and open the installation drawing PDF. A title box on the drawing will show what FH the mounting was designed for. Should you want the same SAE size but a different option ( wet vs dry, iron vs aluminum ) you only need to compare the FH's starter location, mounting pad location/dimensions and the housing's thickness to decide if the FH is an acceptable substitute. |
|
|
|
|
| 03/06/09 |
Remote Mount Panels and Throttle Extensions |
|
| |
| When ordering a control panel for an ecm controlled engine, you may take advantage of the panel's ability to be mounted remotely. We supply 12 and 24 foot extension harnesses for that purpose. 100 feet of extension harness combinations is the most allowed. The electronic "hand throttle" is also available for remote mounting. The throttle is designed to be plugged into the control panel, therefore it moves with the panel, without requiring an extension harness as well. You only need an throttle extension harness if you want to separate the throttle from the control panel. The throttle extension limit is also 100 feet. The maximum, combined extension of panel and harness is 100 feet. e.g. if you move the panel 75 feet, the throttle can only be extended an additional 25 feet. |
|
|
|
|
|
| 03/02/09 |
News for Emergency Stop Users |
|
| |
 |
CPP has a five amp fuse in the harness from the engine ecm to the CPP supplied control panel. It sits in the wire going from the ecm to the 31 pin connector, pin number one. E-stops users can access this fuse to accomplish their task, easier then cutting into the harness. A suggested diagram for wiring an e-stop, using the 5 amp fuse connection is available here. |
|
|
|
|
| 02/06/09 |
New Low Mount Air Cleaners for Enclosed Power Units |
|
| |
CPP has released new air cleaner options for enclosed QSB6.7, QSC8.3 and QSL9 power units. The rain caps on the air cleaners are completely below the enclosure top.
For more information on these new options, please follow the links below.
QSB6.7-P Tier 3
QSC/QSL Tier 3 |
|
|
|
|
|
| 01/07/09 |
Cleanfix Reversing Fan for QSK19-P T3 |
|
| |
Download the Power Point Presentation. |
Benefits
- Very effective radiator cleaning solution
- Virtually maintenance free
- Simple setup (set timer, walk away)
- Comes with all necessary equipment
- Clean radiators save fuel
- Clean radiators keep cooling efficiency maximized
For option details, click here. |
|
|
|
|
| 01/01/09 |
B3.3NA with Rear Engine Power Take-Off (REPTO) |
|
| |
CPP is pleased to announce the released PRIC 5522 in CSL for the B3.3NA, engine configuration D781008CX03. This price spec includes the REPTO flywheel housing (FH9686) and the appropriate CPP options for mounting and installing this engine configuration. For additional information, as well as drawings, please check out the product page.
 
|
 |
|
|
|
|
| 06/27/08 |
|
|
| |
|
Due to the volume of orders being received through the Cummins Distribution Network (our only customers), CPP is adding additional assembly personnel to increase our through-put and improve our Lead Times. Our goal is to better serve you, our customers. |
|
|
|
|
| 06/26/08 |
|
|
| |
The CPP team would like to thank Cummins Western Canada for their recent order for 14 QSK23-P Power Units! |
|
|
|
|
|
| 06/25/08 |
New QSK19-P Tier 2 Low Profile Power Unit
|
|
| |
Click for Larger Image
|
CPP has released a QSK19 Power Unit for use in the oil and gas industry. The unit is designed for use as a Mud Pump or Draw Works power source.
Development of this product is the result of a joint effort between Cummins Western Canada and Cummins Power Products. Randy Pehlke and Ching Gettman of Cummins Western Canada, along with Randy's Engineering Team were the Voice of the Customer for this product. Stephen Grunewald, Director of Engineering for CPP, and his team member Ryan Hanson took the information from Western Canada and made this product a reality.
- 800HP @ 2100 rpm capability
- Roda Deaco intake shutdown wired into ECM for fuel cutoff during E-Stop
- Ultra compact package for oil and gas market: 68.1” high 115.1” long and 63.75” wide
- Heavy duty steel skid made from ½” plate
- Gages visible through NEMA weatherproof control box viewing window
- Integral transmission cooler equipped
- EPA/CARB/EU certified
- 125°F Ambient temperature capable
To view a presentation with more diagrams, please click here.
|
|
|
|
|
| 05/22/08 |
QSK23-P Tier 2 Power Unit Released
|
|
| |
Cummins Power Products has released the QSK23-P Tier 2 power unit. More information about this new product offering is available here. |
 |
|
|
|
|
| 2/27/2008 |
New DC Genset Case Study Now Available |
| |
The El Paso, TX Water Utilities desalination plant uses three DCathlon gensets for supplemental power to their injection wells. Read the full case study. |
|
| 2/26/2007 |
Citizens Communications Powers Up with DC Generators! |
| |
Citizens Communications, part of the Frontier family of telecommunications companies, is the newest customer for Cummins Power Products. This particular relationship is especially rewarding as Citizens had previously purchased several of the DCathlon DC Generators when the product was assembled by Cummins Power Generation. Citizens is planning more DCathlon installations in the near future in order to enhance their system reliability . Citizens Communications is one of the nation's largest rural local exchange carriers, operating in 24 states. |
|
| |
|
| 1/10/2007 |
|
| |
Old main page stories are now being archived for you to look through later. We had several people ask us what happened to the old news, so we are starting to add these stories to a new section to make things easier to find. |
|
| 10/20/2007 |
|
| |
QSB3.3 Tier 3 Power Units Now Available!
Price spec information available here.
Additional Power Unit information available here.
|
 |
|
|
| 9/1/2007 |
|
| |
New CPP LIGHT web site!
Cummins Power Products has launched a new web site for International distributors, Domestic dealers, and end users. It is based on our standard CPP web site but has sensitive information removed, such as pricing and parts drawings, so that it can be provided to the general public.
Serial number look-up and order status are available for customers to view, however the data will be updated every 24 hours (the standard CPP site is updated continuously). As a NA Distributor or fully owned international distributor, your best source of information will continue to be our standard CPP web site however you may find the new public site useful when you are not in the office. The new site is located at CumminsPowerProducts.com |
|
| 7/1/2007 |
|
| |
Cummins Power Products has made the decision to replace all Power View 100 equipped panel options with the Teleflex model 2600 GEM ( generic engine monitor) The Gem works the same way as the PV 100 and is expected to provide better reliability. The new panel option IN 11264 / INPU 10213 replaces all the PV 100 options. It works with both 12 and 24 volts systems.
PV 100's can no longer be ordered. Barb Morrison will work with you to convert your shop orders during the short transition period.
|
|
|
